FASTLANE modified NX RNC Single Entry BILLET CROSS-BAR PLATE 250-600+ HP
RECORD SETTING PERFORMANCE!
If you want to run 4.40's in Ultra Street or 4.50 Limited 275 this is the plate you need!
The Plate
The plate is based on a modified NX RNC Billet Single Entry Crossbar Plate. This plate better flow, atomization, distribution and horsepower. On high PPH flow other plates over labor certain cylinders, this plate is better balanced and makes the engine happier.
The Solenoids
The fuel solenoid is the NX Bottom Exit with a .310 orifice. The nitrous solenoid is a HIGHLY MODIFIED & ported 178-inch orifice Trash Can solenoid for maximum flow it also has a PTFE plunger. The solenoid package is designed to help minimize lean spots at launch that are created when using a Progressive controller. Large fuel solenoid provides high exit pressure for better fuel atomization.
Pressure Port:
Includes a port fitting on the outlet side of both solenoid's to be used with a pressure transducer sensor for progressive controller applications.
FLN- Flowing
Each NX RNC system is flowed and comes with custom jet mapping from 250-600+ HP.
Kit Includes: plate, Solenoid mounting bracket, high flow lines, flow matched jets and solenoids. FLN blueprint, flowed and jet mapping. Comes ready to put on manifold and hook up supply lines.
At time of cross bar plate purchase a PN 8000 Pro-Series flow tool can be bought for $50 off
RECORD SETTING PERFORMANCE!
If you want to run 4.40's in Ultra Street or 4.50 Limited 275 this is the plate you need!
The Plate
The plate is based on a modified NX RNC Billet Single Entry Crossbar Plate. This plate better flow, atomization, distribution and horsepower. On high PPH flow other plates over labor certain cylinders, this plate is better balanced and makes the engine happier.
The Solenoids
The fuel solenoid is the NX Bottom Exit with a .310 orifice. The nitrous solenoid is a HIGHLY MODIFIED & ported 178-inch orifice Trash Can solenoid for maximum flow it also has a PTFE plunger. The solenoid package is designed to help minimize lean spots at launch that are created when using a Progressive controller. Large fuel solenoid provides high exit pressure for better fuel atomization.
Pressure Port:
Includes a port fitting on the outlet side of both solenoid's to be used with a pressure transducer sensor for progressive controller applications.
FLN- Flowing
Each NX RNC system is flowed and comes with custom jet mapping from 250-600+ HP.
Kit Includes: plate, Solenoid mounting bracket, high flow lines, flow matched jets and solenoids. FLN blueprint, flowed and jet mapping. Comes ready to put on manifold and hook up supply lines.
At time of cross bar plate purchase a PN 8000 Pro-Series flow tool can be bought for $50 off
FASTLANE modified NX RNC Single Entry 4150 BILLET CROSS-BAR PLATE
4150 Holley flange LESS BOTTLE AND LINE - 250-600hp
FASTLANE modified NX RNC Single Entry 4150 BILLET CROSS-BAR PLATE w/15lb bottle
4150 Holley flange - 250-600hp
Ships in 3 business days after payment is received.
FASTLANE modified NX RNC Single Entry 4500 BILLET CROSS-BAR PLATE
4500-Dominator flange LESS BOTTLE AND LINE - 250-600hp
Ships in 3 business days after payment is received.
Ships in 3 business days after payment is received.
FASTLANE modified NX RNC Single Entry 4500 BILLET CROSS-BAR PLATE W/15 LB BOTTLE
4500-Dominator flange - 250-600hp
Ships in 3 business days after payment is received.
NX RNC Billet Crossbar plate for the PSCA 235 Limited class
PSCA 235 LIMITED version
with High Flow -4 Line and Ported .125 Bottom Exit Nitrous Solenoid
450+ HP
FASTLANE modified ULTRA STREET DRY NX RNC BILLET CROSSBAR PLATE
Product Description
This system is designed for Limited 275 and Ultra Street Jet Limit classes. This kit relies on the ECM for fuel enrichment via the fuel injectors. The system is completely blueprinted and then mapped-out. Includes a flow sheet with LB/HR of nitrous flow for each setting and fuel adder information, ignition timing map for your particular engine and a tuning info book for your application.
The Plate
The plate is based on a modified NX RNC Billet Single Entry Crossbar Plate. This plate better flow, distribution and horsepower. On high PPH flow other plates over labor certain cylinders, this plate is better balanced and makes the engine happier.
The Solenoids
The nitrous solenoid is a HIGHLY MODIFIED & ported 183-inch orifice Trash Can solenoid for maximum flow it also has a PTFE plunger.
Also available in a Custom Aluminum Body .199 Orifice Trashcan version
This system is designed for Limited 275 and Ultra Street Jet Limit classes. This kit relies on the ECM for fuel enrichment via the fuel injectors. The system is completely blueprinted and then mapped-out. Includes a flow sheet with LB/HR of nitrous flow for each setting and fuel adder information, ignition timing map for your particular engine and a tuning info book for your application.
The Plate
The plate is based on a modified NX RNC Billet Single Entry Crossbar Plate. This plate better flow, distribution and horsepower. On high PPH flow other plates over labor certain cylinders, this plate is better balanced and makes the engine happier.
The Solenoids
The nitrous solenoid is a HIGHLY MODIFIED & ported 183-inch orifice Trash Can solenoid for maximum flow it also has a PTFE plunger.
Also available in a Custom Aluminum Body .199 Orifice Trashcan version
FASTLANE modified ULTRA STREET DRY NX RNC BILLET CROSSBAR PLATE (Dominator Flange)
This plate set up put the first Ultra Street car into the 4.40's!
Also set the 4.46 @ 156 mph Class Record
FASTLANE modified ULTRA STREET DRY NX RNC BILLET CROSSBAR PLATE W/ custom .180 orifice High Lift Stainless Steel body ported trashcan solenoid
PRO-MAGNUM CROSS-BAR PLATE 200-600+ HP
(For classes limiting the racer to a single stage plate system) Perfect for Ultra/Ultimate Street Class!
The Plate
The plate is 1” thick CNC 6061 Billet Aluminum Cross Bar Plate. Based on a Fast Lane Nitrous Racing Systems modified NOS Crosshair Plate which has four stainless crossed spray bars (2 nitrous/2 fuel) that equate to better flow, atomization, distribution and horsepower.
The Solenoids
The fuel solenoid our own “Cheater style” fuel solenoid with a .186 orifice. The nitrous solenoid is our "Ported" .178-inch orifice Trash Can solenoid for maximum flow it also has a PTFE plunger. The solenoid package is designed to help eliminate lean spots at launch that are created when using a Progressive controller. Large fuel solenoid provides high exit pressure for better fuel atomization.
Pressure Port: Includes a port fitting on the outlet side of both solenoid's to be used with a pressure transducer sensor for progressive controller applications
Each FLN PRO-MAGNUM system is flowed, the bars are flow balanced and comes with custom jet mapping from 200-575+ HP.
Kit Includes: plate, Solenoid mounting bracket, high flow lines, flow matched jets and solenoids. FLN blueprint, flowed and jet mapping. Comes ready to put on manifold and hook up supply lines.
At time of cross bar plate purchase a PN 8000 Pro-Series flow tool can be bought for $50 off
(For classes limiting the racer to a single stage plate system) Perfect for Ultra/Ultimate Street Class!
The Plate
The plate is 1” thick CNC 6061 Billet Aluminum Cross Bar Plate. Based on a Fast Lane Nitrous Racing Systems modified NOS Crosshair Plate which has four stainless crossed spray bars (2 nitrous/2 fuel) that equate to better flow, atomization, distribution and horsepower.
The Solenoids
The fuel solenoid our own “Cheater style” fuel solenoid with a .186 orifice. The nitrous solenoid is our "Ported" .178-inch orifice Trash Can solenoid for maximum flow it also has a PTFE plunger. The solenoid package is designed to help eliminate lean spots at launch that are created when using a Progressive controller. Large fuel solenoid provides high exit pressure for better fuel atomization.
Pressure Port: Includes a port fitting on the outlet side of both solenoid's to be used with a pressure transducer sensor for progressive controller applications
Each FLN PRO-MAGNUM system is flowed, the bars are flow balanced and comes with custom jet mapping from 200-575+ HP.
Kit Includes: plate, Solenoid mounting bracket, high flow lines, flow matched jets and solenoids. FLN blueprint, flowed and jet mapping. Comes ready to put on manifold and hook up supply lines.
At time of cross bar plate purchase a PN 8000 Pro-Series flow tool can be bought for $50 off
PRO-MAGNUM 4500 CROSS-BAR PLATE -600+ HP
4500- Dominator version
Ships in 3 business days after payment is received.
PRO-MAGNUM 4150 CROSS-BAR PLATE -575+
4150- Holley version
Ships in 3 business days after payment is received.