NITROUS BOTTLES AND ACCESSORIES
PN 7048 10LB NITROUS BOTTLE W/PRO-NITROUS VALVE
PN 7049 15LB NITROUS BOTTLE W/PRO-NITROUS VALVE
PN 7050 MODIFIED D-6 BOTTLE NUT-"HIGH FLOW" $20.00
PN 7051 MODIFIED D-4 BOTTLE NUT-"HIGH FLOW" $20.00
PN 7052 PRO-NITROUS BOTTLE VALVE w/1/2" SIPHON TUBE (Supports 800+HP)
PRO NITROUS Bottle Valve Fastlane specializes in BIG single stage and custom multiple stage nitrous systems. Therefore nitrous bottle flow had to be addressed to support these systems. The final results led to the highest flowing CGA (Compressed Gas Association) approved bottle valve on the market. The valve assembly is a specially modified version of the industry standard. Control valve lift is much greater, the internal passageways are larger .328-orifice and the route is less circuitous. Our unique ½” pick-up tube design controls the rate of expansion. This valve consistently delivers higher volumes of liquid nitrous to the solenoids throughout the duration of the pass. Perfect for Multi-Stage Nitrous applications and also the Big Single stage systems used in X275. It will support 800+hp.
PN 7053 IHRA SAFETY BLOW OFF CAP (3000-PSI)
PN 7055 D-4 14FT STAINLESS STEEL BRAIDED SUPPLY LINE
7088 D-4 HIGH-FLOW TRIPLE INSULATED THERMO PLASTIC SUPPLY LINE 6-FOOT
708 D-6 HIGH-FLOW TRIPLE INSULATED THERMO PLASTIC SUPPLY LINE 6-FOOT
7090 D-8 HIGH-FLOW TRIPLE INSULATED THERMO PLASTIC SUPPLY LINE 6-FOOT
PN 7057 D-6 PRO PURGE SYSTEM
PN 7058 D-8 PRO PURGE SYSTEM
PN 7057B D-6 MONSTER PURGE SYSTEM
PN 7058B D-8 MONSTER PURGE SYSTEM
PN 7059 1-1/2" 0-1500 PSI 2% ACCURACY GAUGE FOR BOTTLE VALVES
PN 7060 300-AMP CONTINIOUS DUTY RELAY
PN 7061 50 AMP NITROUS ARM SWITCH
PN 7062 STANDARD SOLENOID MAINTENANCE WRENCH
PN 7062T TRASH CAN SOLENOID MAINTENANCE WRENCH
PN 7069 4" 0-1500-PSI NITROUS PRESSURE GAUGE 6AN (+/- 1.5%)
PN 7070 4" 0-1500 PSI NITROUS PRESSURE GAUGE 8AN (+/- 1.5%)
PN 7071 FUEL DISTRIBUTION BLOCK PSI SENSOR FITTING $8.00
High Flow Quarter Turn Valve
The Fast Lane N20 Stainless Steel high flow 1/4 turn nitrous shut off valve W/ PTFE seals is a great addition to your nitrous system and works well with a Nitrous pressure gauge. This is quick way to shut off your nitrous supply. The valve provides a very easy way for the driver to arm the nitrous system. These valves have a 1/2 NPT inlet /outlet, an inside diameter of .500″. You should never let solenoids sit with pressure on them; it shortens the solenoid plunger life. With this valve, you can leave the bottle on, but keep pressure off solenoids until you get ready to run. The valve allows you to shut it off and purge the line empty at the end of a run, without having to turn the bottle off.
.011 to .060 Jet Pin Gauge Set
Verify your jet size before you install them.
